Dsc-w230 user manual

Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair.

Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. After correcting the original service problem, perform the following. Boards requiring use of unleaded solder are printed with the lead- free mark LF indicating the solder contains no lead. Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.

Unleaded solder has the following characteristics. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about Caution: The printed pattern copper foil may peel away if the heated tip is applied for too long, so be careful!

Unleaded solder is more viscous sticky, less prone to flow than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Dispose of used batteries according to the instructions. Adjust the distance so that the output waveform of. When it comes to the question of what is the most important part of an electronic product especially digital camera product, we say it is the manual.

It is because with the manual, both users and enthusiast will be able to get the needed information about a certain product. With this manual too, the learning process upon the camera product is started.

So, we can say that manual is the best reference when we want to understand the digital camera product. It is such a state that we will talk about the specification first before hitting the manual.

And for now, we will talk about the specification of this Germany-made camera, starting with the overall look of it first. The design of this camera is a bit big compared to other point-and-shoots. The controls on the w work well and are comfortable to use. The lcd on the w is a decent 3 inches and packing , pixels. This camera is identical to its predecissor W It also equipped with image stabilization which function is to help reduce the blurriness caused by camera shake.

Moreover, Sony DSC W manual also says that other notable features of from this camera include seven scene modes plus an Intelligent Scene Recognition mode which automatically chooses between five of these modes. The ISO setting starts from to 3, equivalent. Furthermore, The w gives you in-camera retouching capabilities, with soft focus, fish eye effect, cross filter, partial color, retro, radiation, red-eye correction, trimming, unsharp masking and smile effects being on offer.

The performance of W is surprisingly impressive for its class. It has very respectable shooting speeds. The shutter lag time is only 0.